BeBe Peugeot

April 2017

For this pattern I used Jelutong wood for the first time which is a commonly used pattern making wood. I have found it to be

considerably nicer wood to work with than MDF which I have used for most of my previous patterns. Below is the pattern

for a BeBe Peugeot intake manifold part to be cast in brass. The patter is in two halves making the moulding process simpler.

Below is the core box which is used to make a sand core (using Sodium Silicate to bind the sand together which hardens with CO2.

The core is used to make the hollow cavity inside the casting.